Inconel 601 welding Wire

Inconel 601 welding Wire 1.Supply: Bar/Tube/Plate/Strip/Flange/Wire 2.Size: Any 3.EDT: 10 days 4.QC: ISO9001

Inconel 601 wire

1.Supply: Bar/Tube/Plate/Strip/Flange/Wire

2.Size: Any

3.EDT: 10 days

4.QC: ISO9001

Inconel 601 Chemaical composition

Alloy	%	Ni	Cr	Fe	C	Mn	Si	Cu	Al	P	S
601	Min.	58	21						1.0
	Max.	63	25	balance	0.1	1.5	0.5	1	1.7	0.02	0.015

Inconel 601 Physical properties

Density	8.1g/cm³
Melting point	1320-1370°C

Inconel 601 Alloy m inimum mechanical properties in the room temperature

Alloy state	Tensile strengthRm N/mm²	Yield strengthR P0. 2N/mm²	ElongationA 5 %	Brinell hardnessHB
Annealing treatment	650	300	30	-
Solution treatment	600	240	30	≤220

Characteristic as below1.Excellent inoxidability in the high temperature.2.Good resistance to carbonizing.3.Good inoxidabilitiy in sulfur atmosphere 4.Good mechanical property in both room temperature and high temperature.5.Good resistance to stress corrosion cracking, 601 have high creep rupture strength since it limits the carbon content and grain size, so recommend to use for above 500°C environment. Inconel 601 Metallurgical structure601 is face-centered cubic lattice structure. Inconel 601 Corrosion resistanceOne of the mainly performance of 601 is inexorability in high temperature, even in very inclement conditions. If in the process of heating and cooling cycle, 601 can generate the dense layer of oxide film to get high spalling resistance. 601 have good carbonation resistance. With excellent inoxidability in the high temperature of sulfur atmosphere since it has high chromium and aluminum content. Inconel 601 Application field1.The tray,basket and tool clamp in the heat treatment factory.2.Steel shares at annealing and radiation control, high-speed gas burners, Industrial furnace silk screen.3.Separate tank of ammonia reforming and catalytic support grid of nitric acid producing.4.Exhaust system parts 

We mainly produce special alloy: Inconel series, Incoloy series, Hastelloy series,Monel series,Austenite Stainless Steel,Biphase Stainless Steel and Precipitation Hardening Stainless Steel.

The shapes of products are rod, pipe, plate, strip, flange, wire, ring, cake, fittings and some other special requirements of the forgings.

We can supply all kinds of size of material.

We have a large quantity of goods in stock. So we can rapidly deliver the normal series alloy.

Our company has been confirmed with ISO9001-2000.

We have completed inspecting equipment and would show the inner inspection report for each lot of goods in your order.

The customer is unnecessary to worry about the quality.

All the goods shall be pack with bubble bag and hard plywood pallet. Be safe enough.

All the alloy we can produce is as below:Inconel series:

Inconel 600,  Inconel 601, 

Inconel 617,

Inconel 625,  Inconel 625LCF,  Inconel 686,

Inconel 706, Inconel 718, Inconel 718SPF, Inconel 725,  Inconel 751, Inconel 783,  

INCONEL 690,

Incone X-750

Incoloy series:

Incoloy 800, Incoloy 800H, Incoloy 800HT , Incoloy 801,  Incoloy 825, 

Incoloy 903, Incoloy 907,  Incoloy 925,  Incoloy 926, 

Incoloy 25-6Mo, 

Incoloy A-286

Hastelloy series:

Hastelloy B,  hastelloy B-2,  hastelloy B-3,  

Hastelloy C,  hastelloy C-4,  hastelloy C-22,  hastelloy C-276,  hasteelloy C-2000, 

hastelloyG-3,  hastelloyG30, 

hastelloyX,  hastelloyHX

Monel series

Monel 400 (UNS N04400, W.Nr 2.4360)

Monel K500 (UNS N05500,)

Austenite Stainless Steel:

310S  (UNS S31008, JIS SUH310S, W.Nr 1.4845)

317 (UNS S31700, F317, JIS SUS317)

317L (UNS S31703, F317L, JIS SUS317L, W.Nr 1.4438 )

321 (UNS S32100, F321, JIS SUS321)

347 (UNS S34700, F347,  JIS SUS347,  W.Nr 1.4550 )

347H (UNS S34709, F347H, JIS SUS347H, W.Nr 1.4912)

Nitronic 50 (UNS S20910, Fxm-19, XM-19)

Nitronic 60 (Alloy218, UNS S21800)

Alloy 20 (UNS N08020, F20 )

254SMo (UNS S31254, F44, W.Nr 1.4547)

904L (UNS N08904, F904L )

645SMo (UNS S32654, W.Nr 1.4652)

253Ma (USN S30185 )

Biphase Stainless Steel

F51 (UNS S31803, AL2205, JIS SUS32953L, W.Nr 1.4462 )

329 (UNS S32900, F54 )

F55 (UNS S32760, F55, W.Nr 1.4501)

2205 (UNS S32205, F60,)

255 (UNS S32550, F61, JIS SUS32954L, W.Nr 1.4507)

Precipitation Hardening Stainless Steel

630,17-4PH (UNS S17400, JIS SUS630, W.Nr 1.4542)

631,17-7PH (UNS S17700, JIS SUS631, W.Nr 1.4568)

632,15-7MoPH (UNS S15700, W.Nr 1.4532)

635 (UNS S17600)

XM-12,15-5PH (UNS S15500, W.Nr 1.4545)

XM-13,13-8MoPH (S13800,)

Inconel 601 welding Wire